raspicam.md

Setup

This Robotis emanual page describes how to setup the Raspberry Pi camera to be used with Turtlebot3.

Here is a streamlined guide to quickly get a raspi camera working with a TB3. This entire process may take a few minutes - worst case, if you have to fix apt-get errors, upwards of 30 minutes.

1. sudo raspi-config in the TB3's terminal. Navigate to option 3: Interfacing options. The first option in the sub-menu is camera - select it, then select yes when prompet to enable camera interfacing. Then, navigate to finish and reboot the robot for the change to take effect.

2. do a sudo apt-get update and sudo apt-get upgrade to make sure there are no errors. If update throws a missing pubkey error, then record the pubkey and use this command: sudo apt-key adv --keyserver keyserver.ubuntu.com --recv-keys <PUBKEY> where is the pubkey that you recorded. once the pubkey is added, update & upgrade. If there are no errors, continue.

3. run the following two commands to add Ubiquity Robotic's repos to apt

   Copy

   sudo sh -c 'echo "deb https://packages.ubiquityrobotics.com/ubuntu/ubiquity xenial main" > /etc/apt/sources.list.d/ubiquity-latest.list'
   sudo apt-key adv --keyserver hkp://ha.pool.sks-keyservers.net:80 --recv-key C3032ED8

4. update & upgrade again.

5. sudo apt-get install ros-kinetic-raspicam-node

6. catkin make

7. if catkin_make fails due to missing diagnostics, install this: sudo apt-get install ros-kinetic-diagnostic-updater

How to launch

roslaunch turtlebot3_bringup turtlebot3_rpicamera.launch will launch the camera alone at a resolution of 640x480. Alternatively, you can also use roslaunch raspicam_node camerav1_1280x720.launch to launch at a higher resolution. To include in a custom launch file, consider using a command like this:

<node pkg="raspicam_node" type="raspicam_node" name="raspicam_node" output="screen">
  <param name="camera_info_url" value="package://turtlebot3_bringup/camera_info/turtlebot3_rpicamera.yaml"/>
  <param name="width" value="640"/>
  <param name="height" value="480"/>
  <param name="framerate" value="10"/>
  <param name="enable_raw" value="true"/>
  <param name="camera_frame_id" value="camera"/>
</node>

handy parameters

The following parameters can be edited in a launch file that launches the Raspi cam to alter its performance:

• enable_raw : allows the camera to publish a topic ~/image, of topic type sensor_msgs/Image if set to true. If not true, only ~/image/compressed will publish (which publishes a topic type sensor_msgs/CompressedImage).

• height and width : change the resolution of the image.

• framerate : changes the rate at which the camera publishes images (maximum 90 fps). Max FPS is also affected by the resolution (higher resolution -> lower max fps)

useful commands

• rqt_image_view : opens a gui where you can select an image topic currently being published and view it from your remote PC.

• rosrun rqt_reconfigure rqt_reconfigure : opens a gui which can edit various raspi settings, such as vertical/ horizontal flipping, image stabilization, and other sliders for various settings